
Slate Floor Stripping and Refinishing
silicon tynex brush. This stiff nylon brush, with different length bristles, will completely strip the Slate floor removing wax, dirt, and grime. All edges, corners and grout lines will be hand stripped clean. This stripping method will not harm the Slate flooring. All of the cleaning chemicals are biodegradable and environmentally safe.PREPARATION: Attention will be given to all areas that need to be taped off and protected. All spots, stains, and marks will be hand scrubbed and scraped to remove all blemishes possible. All grout lines will be pre-soaked with stripping solutions for maximum stripping.
MACHINE STRIPPING : All Slate flooring will be machine stripped clean, using a 160lb. Mercury 175 r.p.m. floor scrubber, equipped with a .46 grit
Any Slate flooring with Urethane coating will need to be stripped using Zip-Strip.
Click Here To Learn More about Zip-Strip
CLEANUP AND
RINSE:
After the Slate
floors are stripped clean all of the solutions will be removed. The floors are then given a complete mopping and thorough rinse
with a low ph neutralizing solution for maximum sealer adhesion.
VACUUMING:
After the Slate
floors have completely dried they are
vacuumed with an Electrolux Olympia Vacuum cleaner with a 3 layer dust
filter. This will insure a perfectly clean floor for the application of
the Slate
floor sealer and Slate
floor finishes. At this point any finish or urethane left from the Slate
stripping will be hand sanded with 60 grit paper.
FINISHING: Now that all the Slate
floors are clean and dust
free the first coat of Spartan Terra Glaze will be applied. This coat
will take approximately 20-30 minutes to dry. The second coat will then be
applied to all the slate
flooring. As the porosity of Slate varies, additional coats may be needed, or the
Slate floor may need to
be buffed at 2000 r.p.m. to achieve maximum shine
Terra Glaze is an acrylic polymer seal developed exclusively for use on stone flooring. A 25% solids metal interlock formulation, Terra Glaze conditions, seals, and protects the natural beauty of stone. Once applied, Terra Glaze becomes a hard, tough seal that combats stone's inherent susceptibility to damage and deterioration due to abrasion, scratching, scuffing, and wear.
To Learn About Spartan Terra Glaze
The CleanPro® Slate refinishing process will clean and
shine your Slate floors as well as providing a protective finish.
Before Stripping Process After Stripping and Finishing
Before Stripping Process After Stripping and Finishing


Before Stripping Process After Stripping and Finishing


Call Us With Any Questions or
Problems Concerning Your Floors
office (203) 263-8220
mobile (203) 426-6305
Click On The Links Below
For More Of Our Services
Acid Etching and Concrete Painting
We service the following states:
Connecticut - New York - New Jersey
Maryland - Rhode Island - Delaware
Massachusetts - Pennsylvania
Vermont - New Hampshire - Maine
*Commercial *Residential *Industrial
Floor Stripping and Floor Refinishing
To View Before and After Pictures

Established 1976
Thank-You For Visiting US
Some Excellent Search Engines
and Submission Sites To Visit
CLEANPRO LLC
CleanproUS.com©
Cleanprofloorcare.com©
2000-2012 All Rights Reserved.
No parts of this site can be copied or used without express written permission.
It is violation of the law to steal peoples intellectual work.
Last updated November 30, 2008
For All Legal Questions Contact